ESD246-B1-W01005 E6327

ESD246-B1-W01005 Protection Devices TVS (Transient Voltage Suppressor) Bi-directional, 5.5 V, 5.5 pF, 01005, RoHS and Halogen Free compliant Features • • • • • • • • ESD / transient protection according to: - IEC61000-4-2 (ESD): ±18 kV (air), ±15 kV (contact discharge) - IEC61000-4-4 (EFT): ±2 kV / ±40 A (5/50 ns) - IEC61000-4-5 (Surge): ±5.5 A (8/20 μs) Bi-directional working voltage up to: VRWM = ±5.5 V Line capacitance: CL = 5.5 pF (typical) at f = 1 MHz Clamping voltage: VCL = 7.5 V (typical) at ITLP = 16 A with RDYN = 0.10 Ω (typical) Very low reverse current: IR < 1 nA (typical) Small form factor SMD size 01005 and low profile 0.43 mm x 0.23 mm x 0.15 mm Bidirectional and symmetric I/V characteristics for optimized design and assembly Pb-free (RoHS compliant) and halogen free package Guidelines for optimized PCB design and assembly process are available in [2]. Potential applications • • IC/ASICs in audio, headset Human digital interfaces, buttons, GPIO Product validation Qualified for industrial applications according to the relevant tests of JEDEC47/20/22 Device information a ) Pin configuration Figure 1 Pin configuration and schematic diagram Table 1 Part information b ) Schematic diagram Type Package Configuration Marking code ESD246-B1-W01005 WLL-2-2 1 line, bi-directional CA 1) 1 The device does not have any marking on the device top. The marking code is on the pads. Datasheet www.infineon.com Please read the Important Notice and Warnings at the end of this document Revision 1.0 2017-06-26 ESD246-B1-W01005 Protection Devices Table of contents Table of contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Potential applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Product validation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Device information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Typical characteristic diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 4.1 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 WLL-2-2 package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 5 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Datasheet 2 Revision 1.0 2017-06-26 ESD246-B1-W01005 Protection Devices Maximum ratings 1 Maximum ratings Note: TA = 25 °C, unless otherwise specified Table 2 Maximum ratings1) Parameter Symbol Values Unit Reverse working voltage VRWM ±5.5 V ESD discharge 2) VESD (contact) ±15 kV VESD (air) ±18 Peak pulse power 3) PPK 44 W Peak pulse current 3) IPP ±5.5 A Operating temperature range TOP -55 to 125 °C Storage temperature Tstg -65 to 150 °C Attention: Stresses above the max. values listed here may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Maximum ratings are absolute ratings. Exceeding only one of these values may cause irreversible damage to the component. 1 2 3 Device is electrically symmetrical VESD according to IEC61000-4-2 (R = 330 Ω, C = 150 pF discharge network) Stress pulse: 8/20μs current waveform according to IEC61000-4-5 Datasheet 3 Revision 1.0 2017-06-26 ESD246-B1-W01005 Protection Devices Electrical characteristics 2 Electrical characteristics IF I PP I TLP VR VF IF ... Forward voltage VR IR ... Reverse voltage RDYN ... Forward current ΔV ΔI ΔI ... Reverse current VCL VTLP Vt1 Vh VRWM IR IT IR VRWM Vh IT ΔI ΔV RDYN ΔV ΔI I PP I TLP IR Figure 2 Datasheet ΔV RDYN VRWM Vt1 Vh VCL VTLP IR Ipp ITLP IT Vt1 VCL VTLP VF ... Dynamic resistance ... Reverse working voltage max. ... Trigger voltage ... Holding voltage ... Clamping voltage ... TLP voltage ... Reverse leakage current ... Peak pulse current ... TLP current ... Test current Diode_Characteristic_Curve_with_snapback_Bi-directional.svg Definitions of electrical characteristics 4 Revision 1.0 2017-06-26 ESD246-B1-W01005 Protection Devices Electrical characteristics Table 3 DC characteristics (TA = 25 °C, unless otherwise specified) 1) Parameter Symbol Values Min. Typ. Unit Note or Test Condition Max. Trigger Voltage2) 3) Vt1 6 – – V – Holding voltage4) Vh 5.8 6.7 8.1 V IR = 1 mA Reverse current IR –